Monday, December 19, 2016

Dust Bath

I thought that providing a spacious dust bath in the middle of the perch gym was a good idea, but apparently chickens have a mind of their own. One of the first things they did after drinking some water on arrival was to start their dust baths in the worst location in my opinion, right next to the coop where the hardware cloth wire is attached.

They have no interest at all in the brighter, sunnier spot by the perch gym.

The soil by the coop is newly delivered top soil while the dirt under the gym is our sandier drier soil.

Yesterday they were at it again, they seem to take prolonged baths every two days or so, laying about in and out of the bath like a day at the spa, indolent, eating, drinking and bathing.

The top soil has stones and other material in it, so while Ken was working on the gutters, I used my salad spinner to sift the soil into dust velvet. Once the chickens got over their spa space invasion, the added inches of glorious smooth soil made them so happy, they hung out in the Eastern corner all day.



































































Chicken salad bar

I want to give the chickens fresh greens every day if I can, I have about depleted the extra greens from my small garden, chard, radishes, kale, dill, mustard greens. They love them but leave the stalks strewn about as well as the whole radish root which they apparently don't like or don't know what to do with.

I made a salad bar yesterday by screwing small branches to the rim of a stump. They were totally uninterested in it, so after a few hours I threw the greens near the perch gym and they liked that. Then I dismantled the coolest chicken salad bar ever.

However, they do like to get to the squishy tomatoes and toss them down from the stump table.




























Sunday, December 18, 2016

East Wing Solarium

We hadn't gotten around to putting latches on the interior doors, didn't think we needed to, but apparently they were curious enough to push the door open and pile into the east wing, the west wing is in shade most of the day in December and apparently shade wasn't what they were after.

A few times a day they will all migrate into the east wing to sunbathe, sprawling about, stretching and sunning themselves. At first I thought they were dying, turning upside down and sideways, but they were just basking and preening themselves.












Thursday, December 15, 2016

Perch Gym

It was fun to see the new chickens navigate the perch gym.
They have a schedule and seem to congregate at the gym four times a day, they give themselves recess. The boldest Barred Rock made it to the highest point. The Rocks are the most curious of the chickens, the biggest risk takers and the first to learn anything new. They are my go to girls to teach first, the rest will follow.















Chicken Arrival

Finally after all the work the chicks landed safely. Smelly and noisy at the post office, but thankfully all alive and well.





























They took to food right away and then made a dustbath in ten minutes.

Thursday, December 1, 2016

East Wing West Wing

Yesterday we completed enclosing both wings protecting the large ventilation cutouts.
They became the East wing and West wing, the doors go on today. It was a bit wonky as originally they were just under roof and not meant to be closed in, so we didn't  set the posts on the correct spacings for the wire and the beams overhung the posts so wiring it was a challenge.
We decided to attach the wire horizontally instead of adding more vertical posts, just adding 2x4's to nail into.



Framing for wire



We thought lattice was a good idea for the small passage doors, but they were a nightmare to make and paint.



West Wing



East Wing





Friday, November 25, 2016

Door to Run

Once we decided where to put the door, we left off the wire cloth and made the door frame.  We're making this up as we go along so it changes all the time.

The opening


We framed the door, attached the wire, then I realized I hadn't painted it yet, off with the wire, paint then reassemble.



I got carried away with the screws because the looked very industrial chic and I wanted to make a pattern. How many did I waste?  Not sure...

 

Next: building up the threshold and attaching the wirecloth.

The Run

We have begun the secure run. Because we made bigger overhangs which will be enclosed we changed the run adding 12 more feet and eliminating another proposed more open run. A lot of time was spent measuring and spacing the post holes. We put 4x4 every 12' and anchored in concrete. The we built 36" on center 2x4 posts and lifted them into place. Overhead we used 2x4's and joist hangers to nail the roof panels to.






























Half the run has wire and under galvanized panel roofing.





2/3 under metal roof, 1/3 clear plastic



It's actually very nice inside the run now. The dust bath is at the end with clear panel roofing.
Hope the Chickens like it!



Tuesday, November 15, 2016

Overhangs

Overhangs, mini roof, awnings, we need to protect the openings from the elements, mostly torrential rains during the summer. We made the first one over the large door in front. It turned out ok, more support than needed for the flimsy corrugated metal roof. I plan the same for the front and a four foot cover over the two long ventilation cutouts on east and west sides.

After the cutouts were made and covered with cloth, Ken said "what's to stop raccoons and cats climbing up to where the chickens are roosting right behind the wire and terrorizing them?"
He wanted to fence in the four foot overhang for a second level of protection from predators.
So we compromised and made the four foot bump out an 8 foot one and roofed the whole thing on both sides.

That gives us three protected runs now instead of one and Ken feels better about safer chickens.













Wire-cloth installation

The ventilation openings have been covered with wire cloth, stapled and nailed in with more wood trim.  For the base of the shed/coop we are wrapping the wirecloth around the perimeter and screwing the wire into the base of the skid framing. I found these awesome little roofing screws that have the washer and rubber gasket on them already. Perfect! It's hard to work with and bend, but we finally merged to clip it and roll it around the corners.